Products

Gate Access....... Just Got Easy

Remote Controls (White One, Two & Four) with sun visor clip

SGC Remote Control Transmitters for Gate and Garage Doors

>Working volt DC12V
>RF Frequency 433Mhz/315Mhz/433.92Mhz
>Range0-50 meters (open space)
>Battery27A 12V
>Controller Size 68*36*13mm
>Remote Adjustable Clip

MiniLoop Single Channel Loop Detector

The MiniLoop is a single channel inductive loop detector designed for parking and access control applications. The detector is connected to an inductive loop mounted in the road surface. When vehicles pass over the loop the detector switches on an output.

Typical applications in the parking and access control environments are safety loops for barriers or gates, arming loops for activating card dispensers, entry or exit loops and vehicle counting

  • Adjustable settings

  • 3/4"(height) X1 3/8" (width) X 2-3/16 (Depth incl. connector).

 

KP-900 Keypad

Embedded Touch Keypad

  • Steel Enclosure Black Powder Coat Finish
  • One relay,1000 users (990 common users+10 visitor users) 
  • Touch keypad PIN length:4~6 digits
  • Card Type:125KHz EM Card
  • Tri-color LED display
  • Backlit keypad, can set automatic OFF after 20 seconds
  • Wiegand 26 bits output
  • Wiegand 26/34 bits input automatic identification
  • Waterproof

KP-950 Keypad

  • Steel Enclosure Black Powder Coat Finish
  • Stainless Steel Faceplate
  • One relay,1000 users (990 common users+10 visitor users) 
  • Touch keypad PIN length:4~6 digits
  • Card Type:125KHz EM Card
  • Tri-color LED display
  • Backlit keypad,can set automatic OFF after 20 seconds
  • Wiegand 26 bits output
  • Wiegand 26/34 bits input automatic identification
  • Waterproof

CR-975 Card Reader

  • Steel Enclosure Black Powder Coat Finish
  • Stainless Steel Faceplate
  • 2000 User Cards Capacity
  • Waterproof, conforms to IP66
  • Card type: 125KHz EM card or SGC Key Fob
  • Working temperature: -40 oC   ~ 60 oC
  • Relay One (NO, NC, Common)
  • Card block enrollment
  • Wiegand 26 bits output
  • Wiegand 26/34 bits input automatic identification

SGC Access Control Cards

125kHz RFID cards are a common type of low-frequency proximity access credential used in security and identification systems. 

Types of 125kHz RFID Cards

  • Read-Only Cards These are the most common and cost-effective type, each pre-programmed with a unique, unchangeable ID number.
    • Uses: Ideal for standard access control systems, time attendance tracking, and staff identification where the ID number is simply read and logged.
    • Sold in Packs of 10, 50, 100

Radio Receivers

We are a dedicated team committed to crafting exceptional experiences. Our focus lies in providing reliable and innovative solutions.

  • Radios come with standard small coil antenna

  • R-350 Two Channel Standard Radio Receiver Momentary

  • R-360 Two Channel Radio Receiver Momentary, Toggle, Latched 

  • R-370 Two Channel Radio Receiver  WIFI Universal 433MHz

R400 / R415 LONG RANGE ANTTENNA KITS

  • Allows you to extend the range of radio receivers

  • Permits remote location of antenna on radio receivers 

  • R415 15' coaxial cable with antenna and bracket

  • Antenna can be moved away from a metal structure

  • Can be moved to an outside location for better receiver performance